The microfiber cloth is one of the most popular and widely used cleaning materials. It is available in a variety of sizes, shapes, and colours to suit your different cleaning requirements. A microfiber cloth is the preferred addition to your cleaning accessories whether you need to dust your windows or clean a stain from your kitchen countertop.With millions of fibers, microfiber lifts and holds dirt, grease, grime, liquids and bacteria. These fibers include both positive-charged polyester fibers and negative-charged nylon fibers that actually attract and pull up whatever is on the surface you’re cleaning.
Advantages of Microfiber Cloth
Softness
The most significant feature of microfiber cloth is that its monofilament density is much finer than ordinary fibers up to 0.0001dtex, the sharp reduction in monofilament density, decided to have a number of super dimensional characteristics different from conventional fibers, with a silk-like soft, smooth feel, soft luster, small bending stiffness, easy to bend; fabric surface fiber is fine and soft, good drapability, soft to the touch.
Strong decontamination power
0.4μm diameter microfiber cloth fineness is only 1/10 of silk, its special cross-section can more effectively capture dust particles as small as a few microns, decontamination, the effect of oil removal is very obvious.
Non-shedding
High-intensity combined filament, not easy to break while using the fine weaving method, no drawing, no shedding loop, and the fiber is not easy to fall off from the surface. It is especially suitable for wiping bright paint surfaces, plating surfaces, glass, instrument and LCD screens, etc.
Long life
Because of the strength of microfiber cloth, and toughness, its service life is more than four times the service life of ordinary cotton fiber, many times after washing still does not change, at the same time, polymer fibers will not produce protein hydrolysis like cotton fibers, even after use without drying, will not mold, rot, with a long life.
Easy to clean
Microfiber cloth is the dirt adsorbed between the fibers (not inside the fibers), coupled with high fiber, high density, so strong adsorption capacity, after use only need to use water or a little detergent to clean.
No color fading
The use of dyeing agents and processes for microfiber cloth materials makes it possible to clean the surface of articles without causing any trouble of discoloration and contamination at all.
Why Choose Us
Our products
Our products mainly cover Industrial Non-woven Wipers, Household Wipes, Medical Wipes, Beauty Care products, etc.
Sales team
We own a professional sales team who can service you within 24 hours.We are sure any of your inquiry will get our prompt attention and reply.
Products applications
We are a professional factory dedicated to the research and development, production, sales, and OEM service of nonwoven cleaning products which are widely used in Automotive Refinishing, Aerospace, Hospitality and Food Service, and Industrial and Manufacturing Cleaning.
Our service
We not only provide professional nonwoven solutions, but also established a perfect after-sales system, we promise to feedback to our customers in 24 hours.
Microfiber Cloth Uses
Dusting
Compared to regular cleaning cloths, microfiber cloths lift and trap a lot more dust and dirt, which allows quicker and simpler daily dusting. Use a dry microfiber towel to dust furniture and other surfaces, then use a damp one to get rid of grime or stubborn dust.
Kitchen Cleaning
Microfiber cloths can be used to clean appliances, cabinet doors, countertops, and ceiling fans. To remove dirt, grease, and grime, fold your cloth into sections. Wet one section, then switch to a dry section for shine and polishing. Because microfiber won't scratch the finish, it is even safe to use on stainless steel surfaces.
Window Cleaning
The inside of windows must be wiped clean of dirt and smudges using a damp microfiber cloth before being shined and buffed with a dry one. Use a garden hose to clean external windows.
Cleaning Gadgets
A dry microfiber cloth will get rid of grime and fingerprints on your phone, tablet, laptop, and other electronics without the risk of using water. You can add some spray or dampen the cloth before wiping for more stubborn dust accumulation.
Types of Microfiber Cloths For Cleaning
All Purpose Cleaning
All Purpose and Multi-Surface Cloths are generally what comes to mind when you think of a microfiber towel. Just like the name indicates, they’re good for all purposes and safe for any surface. They have a traditional terry type weave and plenty of surface area for dry dusting, wiping up spills, and general cleaning.
Glass
Microfiber glass cloths are a knit microfiber product. They are specifically designed for removing streaks and smudges from smooth, reflective surfaces like mirrors, windows, electronic screens, even stainless steel. They’re generally used as a drying cloth after the surface has been cleaned to provide a shine like brand-new.
Textured Cloths
Microfiber cloths with a textured weave, like a waffle towel, provide extra power for tasks like scrubbing or drying. For scrubbing, the uneven pattern in the weave help create more friction without damaging a surface so you use less time and energy cleaning. For drying, the high-low construction allows liquid to be picked up in the higher sections and then it wicks away to the lower sections which leaves a dryer surface of the towel.
Polishing
Polishing cloths have a weave with a longer knap that is cut and has a higher pile than an all-purpose terry weave cloth. Polishing cloths are made with a coral fleece microfiber for an ultra-plush and soft feel and look. They’re designed for applying and removing polishes on delicate surfaces like cars and metal. They're excellent for keeping jewelry and silver looking their best.
Understanding the Difference Between Microfiber Cloths
Density
Microfiber cloths come in a variety of densities ranging from low (100g/m2) to very high (1200g/m2). A higher density means that the fabric is thicker and better able to hold liquid and dust particles within the fibers rather than letting them escape back into the air. Higher density also makes it easier to clean tougher surfaces without needing additional scrubbing.
Material
Most microfiber cloths are made from either polyester or polyamide fibers. Polyester is naturally hydrophobic, meaning that liquids bead up on its surface and don’t penetrate deep into its core. Polyamide is slightly less hydrophobic but more absorbent when wet, making it ideal for tasks that require extra liquid such as cleaning windows or interior trim.
Bristle Shape
The bristle shape of a microfiber cloth affects how it cleans surfaces by determining which direction dirt and dust particles move in when wiped across a surface. Straight-weave microfibers are great at removing fine dust while looped-weave ones are better suited all types of dust.
Edge Binding
An edge binding is a protective layer applied around all four edges of a microfiber cloth. However, it can create rough edges that pick-up dirt and debris and scratch your car.
Why Should Use a Microfiber Cloth to Wipe My Eyeglass
I believe that people who wear glasses can feel the daily inconvenience, such as winter from the outside into the house, the lens will be directly fogged, nothing can see clearly! Glasses wear a long time and inevitably will fall on the dust, not to mention the autumn and winter seasons in some cities haze. So what do you do when your eyeglass lenses are dirty? Most people’s reaction may be to glasses on a breath, take out the regular fabric or silk towel, or even raise their sleeves and start wiping. But you know what, this method is easy to damage the lenses.
Clothes have large fiber gaps, which can harbor a lot of dust over time. If there is hard dust inside the cloth (for example, small sand, quartz hardness of 7) will also scratch the lenses, so wiping glasses in this way will only be counterproductive, and the more you wipe, the more blurred they will be. And glasses generally use optical glass lenses or resin lenses, which are resistant to wear and tear and are prone to scratches. Under the microscope, the scratches on the surface of the lenses are mainly divided into two types, one is due to grit scratches, shallow and small, the wearer is not easy to notice; the other is generated by the larger grit scratches, deep and rough around the periphery, in the center area will affect vision.
If the lenses are wiped frequently and are not particularly dirty, then we can wipe the lenses directly with a fiber cloth. The specific method is to hold the cloth with your fingers, let the cloth cover the front and back of the lens, and then gently force the cloth to wipe gently in a single direction until it is clean. Why wipe in a single direction? Because wiping back and forth will bring back the stains that have been wiped off and stain the clean lenses again. However, if the lenses are dirty or have not been wiped for too long, use the following steps.
A. Dirtier lenses should not be wiped directly. The lenses should be wetted first, preferably by rinsing them on a tap.
B. When rinsing, it is best to use a small amount of cleaning solution and use your thumb and index finger in concentric circles to rub around the lens.
C. After the lens is clean, rinse the mirror with water.
D. Try to use velvet and absorbent eyeglass cloth to gently wipe clean in a single direction. This will not leave water and dirt residue.
Microfiber gap is larger, strong ability to remove dust, but with the use of time, will accumulate a lot of dust, please remember to clean (because microfiber cloth is washable products) or switch to a new glasses cloth, with such glasses cloth wipe glasses will only be counterproductive, the more wipe the more blurred.
The Production Process of Microfiber Cloth
Knitting
Fiber yarns are knitted into a blank fabric by circular knitting machines. The knitting comes out in a circular shape, so you need to do a belly-breaking action to get it into a whole fabric.
Dyeing
Once the yarn is knitted into a blank, we need to load the blank into a dyeing tank for dyeing.
The material of Needle Two (100% polyester) is sewn together by sewing machine before entering the dyeing tank (because the length of each batch of blank fabric is limited), after entering the tank, the color mixing dye is heated up to 130 degrees and the temperature is kept at a constant temperature for 3-4 hours (the length of time is decided according to the material and color). After the time is reached, we will leave the tank and use the dewatering machine to dry, and then use the machine to unfold the cloth that is twisted together, and finally use the machine to set the shape at high temperature to make the fabric flat. If the color requirement is high, we have to go back to the new clear water tank to rinse the dye before shaking it dry to get rid of the excess dye or unstable color material attached to the surface. If the color requirement of the fabric is particularly high, we have to use clear water to rinse after all the process is finished (that is, after the high-temperature setting), use the color fixing agent to treat inside the dyeing tank, and then come out of the tank to shake dry, after spreading the fabric, low-temperature setting, so that the treated fabric will not lose color even if it is tested in alcohol.
Needle One (80% polyester and 20% nylon) and island silk (100% polyester): before dyeing with needle two, we have to do an open fiber treatment first. It is to put the blank into the alkali pool at 130 degrees for about 30 minutes so that the fibers of the blank explode (needle one is to destroy the nylon silk, and the island silk is to break the wall of each island-loaded fiber) so that the surface of the fabric is more fluffy, the feel will be more blended.
Double-sided velvet: The whole process is the most complicated. Before dying, we have to do an open fiber treatment (as we mentioned at the door, the purpose of this is to make the surface of the fabric more fluffy, the feel will be more blended), then in the dyeing tank dyeing, after reaching the specified time and temperature out of the tank dehydration, and then spread the cloth for shaping, and then back to the dyeing tank to re-shape (because the previous action will make the fabric is stretched and deformed), and finally absorb the wool and rolled pile.
Brushing
The fabric will do the brushing treatment on the fabric after dyeing. That is the surface of the fiber filaments with machine friction, the surface of its destruction, so as to produce fine fluff so that the surface of the microfiber fabric is softer.
Flocking absorption
It is to suck away the lint/flocking and dust that are completely worn off during the grinding process so that the fabric is cleaner and tidier.
Rolling
The fabric should be rolled in time to be neatly stacked in a roll, otherwise, there will be many wrinkles on the surface of the fabric.
Cutting
Then cut the whole roll of microfiber cloth into pieces according to the size needed by each customer.
Production trademark
Custom logo process on each microfiber cloth according to the client’s demand.
Packaging
The last thing is to customize the packaging according to the requirements of different guests.
Tips to Clean Microfiber Cloths
Do: Wash microfiber clothes after every use or at least after every third use. If they are wet or excessively soiled, washing them after each use is advisable. If they're being used only for light and routine cleaning, wash them at least after every third use.
Do: Read the care tag to see if the cloth needs to be hand-washed. This is not common for cleaning cloths, but some microfiber towels and other items may advise hand-washing.
Do: After cleaning, fold, stack, and store microfiber cloths separately in a drawer or sealed container that protects them from the environment.
Do: Trim off loose threads if necessary, though know that you'll need to replace it once it becomes threadbare.
Don't: Add detergent or soap. Soap actually reduces the effectiveness of microfiber cloths by clogging the spaces between fibers.
Don't: Use anti-cling dryer sheets. Microfiber clothes actually use their own static electricity to attract dust, and dryer sheets will counteract that clinginess.
Don't: Use bleach or fabric softener. Bleach can ruin the fibers, and fabric softener clogs the spaces between fibers, rendering the cloth useless for cleaning.
Don't: Continue to use a dirty microfiber cloth. Dirt and other particles stick to microfiber cloths, which can scratch and damage surfaces.
Don't: Store microfiber cloths in a high-heat environment. Too much direct sunlight can potentially melt and deform the synthetic fibers.
FAQ
Q: Is microfiber cloth better than cotton?
Q: What is microfiber cloth good for?
Q: Are microfiber cloths 100% cotton?
Q: What is the difference between microfiber cloth and normal cloth?
Q: Can I use microfiber cloth for my face?
Q: How to tell if microfiber is good quality?
Q: Can I wash microfiber cloths in hot water?
Q: How can you tell if a cloth is microfiber?
Q: How long should you use a microfiber cloth?
Q: What should you not use microfiber cloths with?
As one of the most professional microfiber cloth manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale cheap microfiber cloth from our factory.
Disposable Protective Suit,